Rev 1.1 Cod. 00.009.122
40
CONEXIONES
A-
es el cable de alimentación,
90-250V-50-60 Hz
B -
es la entrada de B de habilitación o
consentimiento a dosificación
(110Vac; 230Vac; 24V a pedido).
OPCIONAL
C -
es el conector de salida de relé para las
alarmas. (Contactos 3 y 4).
( 5A 250Vca/30Vdc)
NORMALMENTE ABIERTO.
OPCIONAL.
D -
es el conector de la sonda de nivel
(contactos 3 y 4).
OPCIONAL.
E -
es el conector para la entrada mA
(contactos 3 (+) y 4 (-))
F -
es el interruptor de encendido / apagado
(0/1).
OPCIONAL
PARÁMETROS DE FÁBRICA
CONTRASEÑA
= NO INSERTADA
Enable (opcional):
activo
Rotura de tubo (opcional
): activo
Retardo de ignición
: 0 minutos
DOSIFICACIÓN:
mA
mA Min:
4.0mA
% Min:
10%
Dos.Min:
des
mA Max:
20.0mA
% Max:
100%
Dos.Max:
act
RESTAURACIÓN DE AJUSTES DE FÁBRICA
3sec
Presione la tecla
ENTER / MENU
durante 3 segundos para
entrar en la programación.
Use la tecla ▼ para mover el cursor a "Utilidades". Presione
ENTER
para entrar al submenú.
Presione ▼ para mover el cursor a "Reset".
Presione ENTER para entrar.
Con la tecla ▼, visualice "Sí" en Confirma. Presione
ENTER.
Automáticamente la bomba restablece los ajustes de
fábrica.
Presione la tecla
ESC
durante 3 segundos para salir de la
programación.