Rev 1.1 Cod. 00.009.124
7
CONNESSIONI
A -
è il cavo di alimentazione elettrica,
90-250V-50-60Hz
B -
è l’ingresso di Enable o consenso al
dosaggio (110Vac; 230Vac; a richiesta 24V).
OPTIONAL
C -
è il connettore dell’uscita relè per gli allarmi
(contatti 3 e 4). ( 5A 250Vca/30Vdc)
NORMALMENTE APERTO.
OPTIONAL.
D -
è il connettore del sensore di livello
(contatti 3 e 4).
OPTIONAL
.
E -
è l’interruttore On/Off.
OPTIONAL
REGOLAZIONI DI FABBRICA
PASSWORD
= NON INSERITA
Ritardo accensione
: 0 minuti
Enable (optional)
: attivo
Rottura tubo (optional)
: attivo
FUNZIONAMENTO:
Timer
Di fabbrica non è programmato alcun dosaggio Timer.
RIPRISTINO REGOLAZIONI DI FABBRICA
3sec
Premere il tasto
ENTER/MENU
per 3 secondi per entrare in
programmazione
.
Con il tasto
▼
spostare il cursore su “
Utilità
”. Premere
ENTER
per entrare nel sottomenu.
Premere il tasto ▼ per spostare il cursore su “
Ripristino”
.
Premere
ENTER
per entrare.
Con il tasto ▼ far comparire “
S
i” su Conferma. Premere
ENTER
.
Automaticamente la pompa ripristina le regolazioni di
fabbrica.
Premere per 3 secondi il tasto
ESC
per uscire dalla
programmazione.