Verhagen Leiden B.V.
|
Hoge Rijndijk 267
|
2314 AG Leiden
|
T: +31 (0)71 581 30 30
|
F: +31(0)71 541 61 89
3
www.verhagenleiden.nl
1.
Technical specifications and tolerances
The V-move 4XL may only be used within the limits for specifications and tolerances as specified
in the order, on the assembly drawing and in this manual. If the V-move 4XL is not used
according to these specifications, Verhagen Leiden BV no longer bears any responsibility for
the V-move 4XL.
The V-move 4XL has been designed to transfer heavy loads on wheels. The V-move 4XL is only
suitable as a drive-along tug by using driving switches on the tiller head and the remote control.
This tug is not intended for lifting loads.
Do not use the V-move 4XL for other purposes than those for which Verhagen Leiden BV has
made the appliance. This can result in damage and danger to the driver and his/her
environment.
The control unit for the V-move 4XL is supplied with a set of adjustable variables. Apart from
setting these variables, no changes may be made to the control unit or its software.
The height of the tiller arm is adjustable and the battery pack is interchangeable.
Specifications
Year of manufacture
See rating plate.
Connection details
See rating plate.
Dimensions
L = 2,025 W = 1,215 H = 823/1,540 mm
Speed when empty
0-5 km/hour (depending on tiller position)
Temperature limits
-20/60°C
Mover Base Weight
1,760 kg
Counterweight
1,780 kg
Front wheel axle pressure
Maximum 3,000 kg
Maximum pulling load
Max. 40,000 kg, on rails and flat floor
Maximum pulling force
30,000 N
Maximum gradient, with/without load
10% / 20%
Motor controller
Curtis 1234E, 48 V 350 A / 2 min, 175 A / 2-60 min (X 2)
Power
8 KW AC 48 V (X 2)
