background image

Verhagen Leiden B.V. 

|

  Hoge Rijndijk 267 

|

 2314 AG Leiden 

|

 T: +31 (0)71 581 30 30 

|

 F: +31(0)71 541 61 89

 

 

 

 

 

 

 

info@verhagenleiden.nl 

|

 www.verhagenleiden.nl

 

 

2. 

Safety 

The  V-move  4XL  is  built  using  the  latest  technology  and  in  accordance  with  the  recognised 
technical safety regulations. Nevertheless, its use can cause danger of injury or death to the 
user or third parties. Its use can also cause damage to the V-move 4XL or other goods. 

2.1 

Instructions 

1.  Operation and maintenance of the V-move 4XL must be carried out by competent personnel while 

respecting the warnings on the V-move 4XL and according to the user manual. 

2.  The V-move 4XL is suitable for use outdoors. Electrical components are only splash-proof. 
3.  The V-move 4XL is only suitable for ambient 

conditions as mentioned in the ‘Specifications and 

Tolerances’ section in this manual. Any other use is forbidden by Verhagen Leiden BV and can 
result in danger to the driver and/or his/her environment.  

4.  Only  move  safe  and  stable  loads.  The  V-move  4XL  is  unsuitable  for  transporting  trailers  with 

persons. Passengers may not be transported with the V-move 4XL or on the tugged vehicle. 

5.  Make  sure  that  the  capacity  of  the  V-move  4XL  is  sufficient  for  the  weight  of  the  load  to  be 

transported.  

6.  The  V-move  4XL  is  unsuitable  for  moving  goods  containing  toxic,  explosive,  dangerous  or 

flammable substances. 

7.  The V-move 4XL is not licensed for driving on public roads. 
8.  Check whether your V-move 4XL has been licensed for driving in your work environment or have 

this checked, for example for environments with a fire hazard or danger of explosion. When driving, 
sparks can be caused when switching on and off. 

9.  No connection or safety provision whatsoever may be removed while the V-move 4XL is switched 

on. Only use the V-move 4XL when all protective devices and safety-dependent measures are in 
place and ready for operation. 

10.  Deadlines for periodic inspections and maintenance prescribed or mentioned in the user manual 

must be complied with. 

11.  If a machine part becomes damaged or no longer works in the correct way, work must immediately 

be stopped. Resumption is only allowed when the machine part has been repaired or replaced and 
has been checked. 

12.  The V-move 4XL may not be modified without prior written approval from Verhagen Leiden BV. 
13.  In  addition  to  the  user  manual,  generally  applicable  legal  and  other  compulsory  schemes  with 

regard  to  safety,  accident  prevention  and  environmental  protection  must  also  be  complied  with. 
These include, for example, rules for personal protection equipment and traffic regulations.  

14.  Only have the V-move 4XL maintained and repaired by competent and skilled personnel and only 

use original replacement parts. 

15.  Inform operating personnel before starting maintenance work. Shut off the supply voltage before 

you start inspecting or maintaining the V-move 4XL. The battery power must first be disconnected 
from the rest of the machine.  

16.  At  the  end  of  the  working  life,  parts  must  be  disposed  of  in  accordance with  the  local  laws and 

regulations.  

 

Summary of Contents for V-move 4XL



















Reviews: