Verhagen Leiden B.V.
|
Hoge Rijndijk 267
|
2314 AG Leiden
|
T: +31 (0)71 581 30 30
|
F: +31(0)71 541 61 89
8
www.verhagenleiden.nl
4.
Transport
Follow all instructions as described in this manual, in particular in the safety section.
Instructions:
1. A stable loading surface with sufficient carrying capacity must be used.
2. The V-move 4XL must be secured against tipping over or slipping.
3. The following is forbidden:
a.
Going onto or under the V-move 4XL when it is being lifted.
b.
Going within the tipping range of the V-move 4XL when loading.
Report damage during or immediately after delivery to the transporter and to Verhagen Leiden BV. Take
all the necessary measures to prevent further damage.
4.1
Loading on and off
Prevent injury and damage by wrongly positioning the lifting forks of the fork-lift truck.
If the V-move 4XL has to be moved with a forklift truck, the lifting forks must be positioned so that the
centre of gravity lies between the forks. The easiest way is to pick up the V-move 4XL from one side.
The centre of gravity usually lies between the front wheel and the rear axle. Depending on the lifting
capacity and the position of the forklift, the counterweights would need to be removed to get an even
balance.
Another option is to use a forklift transporter ramp. Let the V-move 4XL drive gently, under its own power
and tailfirst, onto the ramp.
4.2
Moving, dragging the V-move 4XL
The V-move 4XL may only be moved by driving under its own power or lifting using a fork-lift
truck. Towing causes serious damage to the drive gear.
