Verhagen Leiden B.V.
|
Hoge Rijndijk 267
|
2314 AG Leiden
|
T: +31 (0)71 581 30 30
|
F: +31 (0)71 541 61 89
11
www.verhagenleiden.nl
6.3 Stop
Procedure:
1. Place the V-move on a flat surface.
2. Release the drive switches.
3. Switch the ignition off.
a. Never leave your V-move outside.
4. Always remove the ignition key whenever you leave the V-move unattended.
If the V-move is not used for a certain period of time, you should:
•
Connect the battery charger.
•
Place the V-move on blocks so that the tyres are off the ground.
6.4 Emergency stop
There is an emergency stop device on the dashboard.
Procedure:
1. Press the emergency stop knob in the case of imminent danger. The emergency stop
disconnects the batteries so that the electrical system is no longer powered. The V-move will
then slow down and stop.
Once the emergency stop situation has been resolved, the V-move can be restarted.
Procedure:
1. Pull out the emergency stop knob.
6.5 Changing the battery
The V-move batteries are replaceable.
Procedure:
1. Switch off the machine and press the
emergency stop [1].
2. Open the battery compartment cover.
3. Remove the battery strap [2].
4. Disconnect the battery cables.
5. Change the batteries [3].
6. Secure the new batteries with the
battery strap [2].
7. Connect the battery cables.
8. Close the battery compartment cover.
9. Release the emergency stop [1].
3
2
1
