VC4000 Manual
75
To turn the analog output on:
1. Select
Sensors…
from the Setup menu
2. Select
Analog Out
3. Select the sensor to use from the list
(PC) GPS Sensors
Vericom has a
5Hz GPS sensor
that connects to the RS232 port on
the VC4000PC. With it GPS location, speed and altitude can be
recorded and mapped every 5Hz.
Figure 27: GPS sensor
To use it plug the GPS sensor into the RS232 port and the VC4000
will
automatically recognize
it and turn on GPS speed. When GPS
speed is on it will store the location at the beginning and end of the
run and also store GPS speed every 5Hz.
To turn the GPS location sensor on:
1. Select
Sensors…
from the Setup menu
2. Select
GPS Sensors
3. Select
GPS Location
4. Select
ON
to store longitude and latitude every 5Hz for
tracking on a map in Profile 5.
5. Turn on
GPS Altitude
to save altitude every 5Hz.
