D
EVICE
S
ETUP
Installing/Replacing an MSAM Card
14
E
335 I
NSTALLATION
G
UIDE
Installing/
Replacing an
MSAM Card
When you first receive your e335, you may need to install an MSAM card or you
may need to replace an old card.
To install/replace
MSAM
1
Loosen the retaining screw at the back of the SAM cover. The retaining screw
is captive, which means that it cannot be fully removed from the slot.
2
Pull out the cover to display the MSAM compartment.
3
Unlock the MSAM compartment by pulling the locking tab downwards.
4
Hook your finger under locking tab and lift up to swivel the MSAM tray open.
5
Place the MSAM card on top of the tray with the gold contacts facing down
and then gently push down the tray to close.
6
Push the locking tab upwards to lock the tray and secure the MSAM card.
7
Place the cover back and tighten the screw.
Figure 4
Inserting an MSAM card
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
NOTE
Not all applications require the use of an MSAM card.
NOTE
Make sure that the MSAM card sits firmly on the tray to be able to close the
MSAM compartment.
A
B
C
D
Summary of Contents for e335
Page 24: ...SPECIFICATIONS Weight 24 E335 INSTALLATION GUIDE...
Page 26: ...MAINTENANCE Smart Card Reader 26 E335 INSTALLATION GUIDE...
Page 30: ...VERIFONE SERVICE AND SUPPORT Battery Pack Instructions 30 E335 INSTALLATION GUIDE...
Page 33: ...TROUBLESHOOTING GUIDELINES Transactions Fail To Process E315 INSTALLATION GUIDE 33...
