background image

S

ETUP

 

Installing or Replacing SAM Cards

UX700 I

NSTALLATION

 G

UIDE

12

7

Save the shipping carton and packing material for future repacking or moving 
of the device.

Periodic Inspection

Periodically inspect the terminal for possible tampering. Signs of tampering 
include:

Overlays in the PIN pad area

Wires protruding out of the device

Foreign objects inserted into the smart card slot or magnetic stripe slot

Any bumps in the casing below the mag stripe slot and any noticeable 
additional mag stripe head from the side

Signs of damage to the tamper-evident labels

A Tamper Warning message on the device display

If any device is found to have been tampered with, please remove it from service 
immediately, keep it available for a potential forensics investigation, and notify 
your company security officer and your local Verifone representative or service 
provider. To contact Verifone, please se

Verifone Service and Support

Installing or 

Replacing SAM 

Cards

You may need to install a Security Access Module (SAM) card or replace the old 
card. You can find three SAM slots and one Micro SD card slot on the UX700 (see 

Figure 2

).

To install or replace 

SAM cards

1

Disconnect the device from all power sources.

2

Disconnect the device from any external devices.

WARNING

Ne pas utiliser un appareil qui a été altéré ou endommagé. Cet appareil est équipé 

d'étiquette d'inviolabilité. Si une étiquette ou d'un composant semble être endommagé, 
en aviser immédiatement la compagnie maritime et votre représentant Verifone ou 
prestataire de services.

Do not use a tampered or damaged unit. The device comes equipped with 

tamper-evident labels. If a label or component appears damaged, please notify 
the shipping company and your Verifone service provider immediately. 

CAUTION

Respecter les précautions standard dans la manipulation d'appareils sensibles aux 

décharges électrostatiques. Les décharges électrostatiques peuvent endommager le 
matériel. Verifone recommande d'utiliser un bracelet anti-statique à la terre.

Observe standard precautions in handling electrostatically sensitive devices. 

Electrostatic discharges can damage the equipment. Verifone recommends using 
a grounded anti-static wrist strap.

Summary of Contents for UX700




































Reviews: