S
ETUP
Using the Smart Card Reader
UX700 I
NSTALLATION
G
UIDE
18
Figure 7
Mounting the UX700
1
Place the reader flush onto the mounting slot.
2
Secure the unit with M5 nuts with a minimum length of 12 mm. Tighten the
nuts using the recommended torque of 7.0 kg-cm (6.1 lbf.in).
Using the Smart
Card Reader
Insert the smart card to proceed with the EMV transaction. EMV supports credit
card and debit card transactions.
To Conduct a Smart
Card Transaction
1
Position the smart card with the contacts facing upward (see illustration
below).
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
NOTE
You can also mount the UX700 using welded screw bolts on the inner side of the
mounting plate. This prevents any vandalism of the screw heads on the outer
surface.
