S
ETUP
Using the Device
UX700 I
NSTALLATION
G
UIDE
20
Using the Device
Card transaction procedures vary depending on the application. Verify the proper
procedure with your application provider before performing a card transaction.
Using the Multi-Card
Reader
The UX700 supports magnetic stripe cards as well as smart cards. Use the
following steps in conducting UX700 card transactions.
To conduct a Card
Transaction
1
Position the card with the magnetic stripe facing backward.
2
To ensure a proper read of the magnetic swipe card, insert the magnetic card
from the side of the device, as shown in the illustration below.
Figure 9
Using the Multi-Card Reader
3
Swipe the card through the magnetic card reader.
4
If using a card, insert the card and follow the on-screen instructions before
removing the card.
WARNING
You will lose transaction data files not yet stored in memory if there is a disruption
in power supply during a transaction.
NOTE
With magnetic stripe cards, swipe completes the transaction.
CAUTION
Lorsque vous utilisez une carte, laissez la carte dans le lecteur jusqu'à ce que la
transaction est terminée.
Retrait prématuré peut annuler la transaction.
When using a card, leave the card in the reader until the transaction is complete.
Premature card removal can void the transaction.
