41
Preparation for use
1. Standing time
After the fridge freezer combination is properly installed and well
cleaned, do not switch it on immediately. Wait to switch the fridge
freezer combination on only after more than 4 hours, so as to ensure
its normal operation.
2. Cleaning
Confirm the accessory parts inside the fridge freezer combination and
wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the socket to start the compressor. After 4
hours, open the freezer door. If the temperature inside the freezer
compartment has dropped noticeably, the refrigeration system is
working normally.
4. Storage of food
After the fridge freezer combination has been running for a period of
time, the internal temperature of the fridge freezer combination will be
automatically controlled according to the user’s chosen temperature
setting. After the fridge freezer combination is fully cooled, you may
load it with food, which usually needs 2~3 hours to cool completely.
In summer, when the outside temperature is high, it takes more than
4 hours for food to be fully cooled (Try to open the fridge freezer
combination door as little as possible before the internal temperature
cools down).
Warning!
• If the fridge freezer combination is installed in a damp area, make
sure to check whether the ground wire and leakage circuit breaker
are normal. If vibration noises are produced due to the fridge freezer
combination contacting the wall or if the wall gets blackened by
air convection around the compressor, move the fridge freezer
combination away from the wall. Installation of the fridge freezer
combination may cause static or image distortions on mobile phones,
fixed-line telephones, radio receivers or televisions nearby, so try to
keep the fridge freezer combination as far away from such devices
as possible.
!
!
Summary of Contents for VPKVC176W
Page 1: ...Veripart is a registered trademark Weena 664 3012CN Rotterdam The Netherlands Made in China ...
Page 32: ...31 ...
Page 90: ...89 ...
Page 120: ...119 ...