14
Changing the Filters (VP5000) (CONTINUED)
*UNDER THE COUNTER MODEL*
TO INSTALL FILTER CARTRIGES
1.
Slide assembly into unit housing matching the filter outlet to unit inlet and press firmly.
2.
Be sure the filter assembly is seated on guide pins (Refer to Diagram 1).
3. Replace locking bolt and turn finger tight.
RETURNING THE UNIT TO USE
1.
If wall mounted, line up mounting guide holes to guide bolts on mounting plate. Allow unit to seat into place,
checking stability before releasing unit from your grip. Tighten screws on mounting plate.
2.
Reconnect water lines by popping line into fitting until seats feel firm.
3.
Replace red locking clip on larger line assembly.
4.
Plug unit back in.
PRESS FILTER RESET BUTTON.
5.
Open ball valve to water supply. Note: Ball Valve is in open Position when valve is in-line with water supply line.
CHECK FOR WATER LEAKS AT CONNECTIONS, IF DETECTED PUSH TUBING TO SEAT FULLY.