Installation Guide
Accessories
Z207061-0A
Page 1 of 2
©2015 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0415
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
Product Overview
The AG01E carbon monoxide (CO) sensing element is designed to work with the Veris GWN Series gas platform unit
to provide monitoring of CO levels. Common sources of CO include automobile exhaust from gasoline engines,
gasoline powered furnaces, gasoline powered water heaters, and gasoline generators. The sensor is calibrated at
the factory, so no field calibration is needed. The AG01E is warranted to meet accuracy specifications for one year
after the date of manufacture.
AG01E
Carbon Monoxide Sensing Element
Specifications
Sensor Type
Electrochemical
Measurement Range
0-500 ppm
Accuracy
±5% of range
Analog Output Scaling
0-200 ppm
Resolution
1 ppm
Sensor Warranty
1 year from manufacture date
Low Level Setpoint
25 or 35 ppm (switch selectable)
High Level Setpoint
180 ppm (fixed)
Operating Temperature Range
-20° to 50°C (-4° to 122°F)
Operating Humidity Range
0-90% RH non-condensing
The AGxx sensors work only with Veris GWN Series gas platform devices.
