1
At Antec, we continually refine and improve our products to ensure the highest
quality. As such, it’s possible that your new case may differ slightly from the
description in this manual. This isn’t a problem; it’s simply an improvement. As of
the date of publication, all features, descriptions, and illustrations in this manual
are correct.
Fusion 430 / Fusion Black 430 User’s Manual
Fusion 430 / Fusion Black 430 – Media Center Case
The Power Supply
The Fusion 430 and Fusion Black 430 come with a 43
0 Watt high efficiency
power supply, compliant with the ATX12V version 2.01 specification. This power supply
features Universal Input, Active PFC, a single 80mm fan, and dual 12V output rails
that deliver safer and more reliable output to your system’s components.
In addition, it features a variety of industrial-grade protection circuitry: OPP (over
power protection), OVP (over voltage protection), UVP (Under Voltage Protection),
and SCP (Short Circuit Protection).
Turn the switch to the ON (I) position before you boot up the computer for the
first time. Normally, you won’t need to switch to the OFF (O) position, since the
power supply includes a soft on/off feature which lets you turn the computer on
and off by using the soft switch on the computer case. If the computer crashes
and you can’t shut it down using the soft switch, you can switch the main power
of the power supply to the OFF (O) position to clear the fault, then reboot.
This power supply features Power Factor Correction (PFC) circuitry in accordance
with European standard regulation code EN61000-3-2. By altering the input current
wave shape, PFC improves the power factor of the power supply. This yields increased
energy efficiency, reduced heat loss, prolonged life for power distribution and
consumption equipment, and improved output voltage stability.
Although care has been taken to prevent sharp edges in your Antec case, we
strongly recommend taking the appropriate time and care when working with it.
Avoid hurried or careless motions and the use of excessive force.
Please use reasonable precaution.
Setting Up
1. Place the case upright on a flat, stable surface.
2.
Remove the thumbscrew from the back of the top panel. Slide the panel towards
the rear to remove it from the case.
3.
Inside the case you should see the power supply, some wiring with marked
connectors (USB, PWR etc.), an installed I/O panel and a power cord.
Disclaimer
This manual is intended only as a guide for Antec’s Computer Enclosures. For more
comprehensive instructions on installing the motherboard and peripherals, please
refer to the user’s manuals that come with those components.
