Skewed micro-bevel
interface
814 Proctor Avenue
Ogdensburg NY 13669-2205
United States
1090 Morrison Drive
Ottawa ON K2H 1C2
Canada
customerservice@veritastools.com
© Veritas Tools Inc. 2015
www.veritastools.com
801 INS-393 Rev. A
Note:
The section between the primary
bevel and the micro-bevel can often be
skewed in relation to the edge; however,
this is not a concern. While the geometry
of the guide is sensitive to even the smallest
infl uences, the geometry at the edge of
the blade is not nearly as sensitive. The
guide will create a square edge, even if the
section between the primary bevel and the
micro-bevel appears to be skewed.
Figure 5: Skewed micro-bevel
interface.
