Table 1-5
System Status LED states
(continued)
Description
Criticality
State
Color
■
Uncorrectable Runtime memory error in
non-redundant mode
■
DIMM Thermal Trip or equivalent
■
CPU ERR2 signal is asserted
■
BMC/Video memory test failed (Chassis ID
shows blue/solid-on for this condition)
■
Both uBoot BMC FW images are bad
(Chassis ID shows blue/solid-on for this
condition)
■
Fatal Error in processor initialization:
■
Processor family not identical
■
Processor model not identical
■
Processor core/thread counts not identical
■
Processor cache size not identical
■
Unable to synchronize processor
frequency
■
Unable to synchronize QPI link frequency
Critical,
non-recoverable
– System is
halted
Solid on
Amber
Power button LED states
The Power button is located on the NetBackup 5240 Appliance control panel. It is
used to turn the appliance on or off.
Figure 1-6
Power button control panel location
Power/Sleep
button
The following table provides a description of each power state.
17
About the NetBackup 5240 Appliance
NetBackup 5240 Appliance control panel
