Verity Systems Puma Operating & Maintenance Manual Download

Page: 12 / 38

Puma Disc Inkjet Printer

ZZ 004 833 - 12 -

SECTION 7: INSTALLING THE PRINTER SOFTWARE

Note:

Your Puma

should not

be connected to your PC during the initial software installation. If

connected,

remove the USB and power cables from the printer

. There may be

variations in the following instructions depending on operating system (2000 or XP) and
configuration.

Place the Printer Driver CD into the CD-ROM drive of your PC. The

Verity_Puma

installation wizard should automatically start.

Follow the on-screen instructions, clicking

Next

when prompted. When prompted, click

Install

to begin installation.

The

Digital Signature Not Found

message box will appear (see Fig.11). You will be asked if

you wish to continue installation, select

Yes

. In Windows XP, select

Continue Anyway

On the final screen click

Finish

Connect the Puma to your PC via the USB cable.

Connect the power cable to the back of the Puma and plug into the power supply. Switch on
the printer.

If the

Digital Signature Not Found

message box appears again, select

Yes

to continue

installation. In Windows XP, select

Continue Anyway

The

Found New Hardware

box will appear on screen, which will search for the driver. In

Windows XP select

No, not at this time

and click

Next

At the next box, select

Install the software automatically (Recommended)

and click

Next

10.

If the

Digital Signature Not Found

message box appears again, select

Yes

to continue

installation. In Windows XP, select

Continue Anyway

11.

When prompted, click

Finish

Note:

The message, which appears above, is merely precautionary from Windows and it is not
necessary to stop the installation.

Note:

If your PC does not recognize the new Puma hardware when you first connect it to your
PC, you should load the print driver via the

Add Printer

icon on your Printer settings:

Place the Print Drive CD into your PC’s CD-ROM drive

On you PC’s desktop, select

Start

Settings

and

Printers

Double click the

Add Printer

icon and follow the on screen instructions

Fig. 11

Summary of Contents for Puma







































Search results

Summary of Contents for Puma

Reviews:

Related manuals for Puma

Brands by name

Popular brands

Verity Systems Puma, Operating & Maintenance Manual

Search results

Summary of Contents for Puma

Reviews:

Related manuals for Puma

Brands by name

Popular brands