PC770 Card Product User Guide
17
PC770 Card External Antenna Connector
External Antenna Connector
This device is equipped with an external antenna connector.
NOTE:
External antenna sold separately.
To access the External Antenna Connector:
1.
Locate the External Antenna Connector on the side of the device.
2.
Remove the rubber protector to expose the External Antenna Connector. (Keep the rubber protector
in a safe place for future use in order to protect the External Antenna Connector from debris when
not in use).
Important:
This device is only authorized for use in notebook
computers that are identical or substantially
similar to
those in its grant application. At least 8 inches (20
centimeters) of separation between the device
with an
attached external antenna and the user’s body must be
maintained at all times. In order to comply
with FCC/IC
regulations limiting both maximum RF output power,
and human exposure to RF radiation, the
maximum
antenna gain must not exceed 3dBi in the Cellular or
PCS bands of operation. If this device is
intended for
use in a mobile device, you (the user) are responsible
for separate approval to satisfy the SAR
requirements
of FCC Part 2.1093 and IC RSS-102/Safety Code 6.