Verizon 310AM-1, Manual

49

Appendix

C385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008

Ve

rs

ion 4,

 29

.10.

2007

FCC / ACTA Information

Warning: 

Changes or modifications to this 

unit not expressly approved by Gigaset Commu-

nications USA LLC could void the FCC authority 

to operate the equipment. This includes the 

addition of any external antenna device.
This equipment complies with Part 68 of the 

FCC rules and the requirements adopted by the 

ACTA. On the bottom of the base station is a 

label that contains, among other information, 

a product identifier in the format 

US:AAAEQ##TXXXX. If requested, this number 

must be provided to the telephone company.
A plug and jack used to connect this equipment 

to the premises wiring and telephone network 

nust comply with the applicable FCC Part 68 

rules and requirements adopted by the ACTA. 

A compliant telephone cord and modular plug 

is provided with this product. It is designed to 

be connected to a compatible modular jack that 

is also compliant. See installation instructions 

for details.
The REN is used to determine the number of 

devices that may be connected to a telephone 

line. Excessive RENs on a telephone line may 

result in the devices not ringing in response to 

an incoming call. In most but not all areas, the 

sum of RENs should not exceed five (5.0). To be 

certain of the number of devices that may be 

connected to a line, as determined by the total 

RENs, contact the local telephone company. 

For products approved after July 23, 2001, the 

REN for this product is part of the product iden-

tifier that has the format US:AAAEQ##TXXXX. 

The digits represented by ## are the REN with-

out a decimal point (

e.g.

, 03 is a REN of 0.3). 

For earlier products, the REN is separately 

shown on the label.
If this equipment causes harm to the telephone 

network, the telephone company will notify you 

in advance, that temporary discontinuance of 

service may be required. But if advance notice 

isn’t practical, the telephone company will 

notify the customer as soon as possible. Also, 

you will be advised of your right to file a com-

plaint with the FCC if you belive it is necessary.
The telephone company may make changes in 

its facilities, equipment, operations or proce-

dures that could affect the operation of the 

equipment. If this happens the telephone com-

pany will provide advance notice in order for 

you to make necessary modifications to main-

tain uninterrupted service. If you experience 

trouble with this telephone system, disconnect 

it from the network until the problem has been 

corrected or until you are sure that the equip-

ment is not malfunctioning.
If trouble is experienced with this equipment, 

for repair or warranty information, please con-

tact Verizon Support at 1-866 374 3864. If the 

equipment is causing harm to the telephone 

network, the telephone company may request 

that you disconnect the equipment until the 

problem is resolved. This equipment is of a type 

that is not intented be repaired by the Customer 

(user).
This telephone system may not be used on coin 

service provided by the telephone company. 

Connection to party line service is subject to 

state tariffs. Contact the state public utility 

commission, public service commission or cor-

poration commission for information. Privacy 

of communications may not be ensured when 

using this phone.
If your home has specially wired alarm equip-

ment connected to the telephone line, ensure 

the installation of this equipment does not dis-

able your alarm equipment. If you have ques-

tions about what will disable alarm equipment, 

consult your telephone company or a qualified 

installer.
This telephone system equipment has been 

tested and found to comply with the limits for 

Class B digital device, pursuant to Part 15 of the 

FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause 

harmful interference, and (2) This device must 

accept any interference received, including 

interference that may cause undesired opera-

tion. These limits are designed to provide 

reasonable protection against harmful interfer-

ence in a residential installation. Some cordless 

telephones operate at frequencies that may 

cause interference to nearby TV’s and VCR’s; 

to minimize or prevent such interference, the 

system base should not be placed near or on 

top of a TV or VCR; and, if interference is expe-

rienced, moving the base farther away from 

the TV or VCR will often reduce or eliminate 

the interference. 
However, there is no guarantee that interfer-

ence will not occur in a particular installation. 

If this telephone system does cause harmful 

interference to radio or television reception, 

which can be determined by turning the system 

off and on, the user is encouraged to try to 

correct the interference by one or more of the 

following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the base 

station and receiver.