13
First steps
C385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008
Ve
rs
ion 4,
29
.10.
2007
Attaching the belt clip
The handset has notches on each side to accommodate the belt clip.
¤
Press the belt clip onto the back
of the handset so that the
notches on the belt clip click
into position.
Placing the handset into the base station and registering
If you purchased a
model with multiple handsets
, repeat the registration
process for each handset. Handsets are assigned the lowest available internal
number (1–4). If more than one handset is registered to the base station, the
internal handset number appears on the display (e.g.
INT 2
). If the internal num-
bers 1–4 are already assigned to other devices, the number 4 will be overwrit-
ten.
Handset is
registering
ë
Ð
V
Þ
Menu
Before you can use the phone, you must
first register the handset to the base station.
¤
Place the handset with the
display
facing up
in the base station.
The handset registers automatically.
Registration can take
up to 5 minutes
.
Do not remove the handset from the base
station during this time.
The following is displayed after successful
registration:
u
The strength of the reception signal
between base station and handset:
– Good to poor:
Ð i Ñ Ò
– No reception:
|
flashes
u
Battery charge status:
–
=
e
V
U
(flat to full)
–
=
flashes: batteries almost flat
–
e
V
U
flashes: charging proce-
dure
Place handset
on base
Menu
