35
Operating the answer machine of the Verizon 310AM base station
C385 V310AM / USA / A31008-M2026-R351-1-6019 / answering_m.fm / 04.11.2008
Ve
rs
ion 4,
29
.10.
2007
Activating/deactivating call
screening
While a message is recording, you can
screen calls through the loudspeaker of
the base station and registered handsets.
Permanently activating/deactivating
call screening
§Menu§
¢
Voice Mail
¢
Call Screening
¢
Handset
/
Base
(
‰
= on)
a
Press and
hold
(idle status).
Call screening can be simultaneously acti-
vated on the base station and handset.
Deactivating call screening for the
current recording
a
Press the End Call key.
Setting up the answer machine
The answer machine has already been
preconfigured at the factory. Set up indi-
vidual settings using the handset.
Setting call acceptance
You can set when you want the answer
machine to answer a call.
The options are:
Immediately
,
10 sec
,
18 sec
or
30 sec
and
Auto
.
In
Auto
mode, the following applies to call
acceptance:
u
If there are no new messages, the
answer machine answers a call after
18 seconds
.
u
If new messages are present, the
answer machine accepts a call after just
10 seconds
.
§Menu§
¢
Voice Mail
¢
Ring Delay
q
Select an option
Immediately
/
10 sec
/
18 sec
/
30 sec
/
Auto
and
press
§OK§
(
‰
= on).
a
Press and
hold
(idle status).
Setting the recording time
You can set the maximum recording time
for a message.
The options are:
1 Minute
,
2 Minutes
,
3 Minutes
or
Unlimited
.
§Menu§
¢
Voice Mail
¢
Message Length
q
Select a recording time and
press
§OK§
(
‰
= on).
a
Press and
hold
(idle status).
Changing the language for voice
prompts and prerecorded
announcements
§Menu§
¢
M 4 O 2
~
Enter a digit for the required
language (
Q
= English,
= Spanish) and press
§OK§
.
Resetting fast access for the
answer machine using Key 1
The integrated answer machine has
already been factory preset for fast access.
However, if you have set the network mail-
box for fast access (
page 37), you can
reset this setting.
§Menu§
¢
Voice Mail
¢
Set Key 1
Answering Machine
Select and press
§OK§
.
a
Press
and
hold
(idle status).
When you have selected the answer
machine, press and
hold
Key
1
. You will be
connected directly.
The setting for fast access applies to all
registered handsets.
