44
Base station settings
C385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008
Ve
rs
ion 4,
29
.10.
2007
Resetting the system PIN
If you have forgotten the system PIN, you
can reset it to the original code
0000
by
resetting the base station to its default set-
tings.
This will also reset every other
setting
, see "Restoring the base station to
Changing ringer melodies
u
Volume:
You can choose between five volumes
and the "crescendo" ring,
Select "0" to deactivate the base station
ringer melody.
u
Ringer melodies:
You can set a ringer melody for external
§Menu§
¢
Settings
¢
Base
¢
Audio Settings
¢
Ringer Volume
/
Ringer Melody
For how to adjust the settings,
Repeater support
With a repeater, you can increase the
range and reception strength of your base
station. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition:
A repeater is registered.
The
Eco Mode
mode is deactivated.
§Menu§
¢
Settings
¢
Base
¢
Additional Features
¢
Repeater Mode
§Yes§
Press the display key.
When repeater mode is active, the menu
item is marked with .
Restoring the base station to the
factory settings
When restoring factory settings:
u
Handsets are de-registered
–
When resetting using the menu:
All Verizon handsets
–
When resetting using the key on
the base station:
Also all handsets
of other GAP-capable devices
u
Individual settings are reset
u
All lists are deleted
u
The system PIN is reset to the original
code
0000
Only the date and time are retained.
Resetting the base station using the
menu
§Menu§
¢
Settings
¢
Base
¢
Base Reset
§OK§
Press the display key to
confirm.
Resetting the base station using a key
on the base station
¤
Disconnect the power cord from the
base station.
¤
Hold down the Registration/Paging key
page 2) on the base station while
reconnecting the power cable to the
base station. Press and hold the key
until you hear a confirmation tone.
The base station has now been reset.
Please note
Repeater support and
Eco Mode
page 38) cancel each other out,
meaning both functions cannot be
used at the same time.
‰