Setting up your tablet
Your tablet already has a SIM card installed.
Optional:
Insert the microSD card
1.
With the tablet facing down, open the microSD card slot cover.
2.
Insert the microSD card into the slot on the right with
the gold contacts facing down, as shown below. Then,
gently push the microSD card into the slot until it clicks
into place.
3.
Close the microSD card slot cover.
Charge your tablet
Before turning on your tablet, charge it fully.
1.
Connect one end of the USB cable to the USB/charger port of your tablet.
2.
Connect the other end of the USB cable to the
charger.
3.
Plug the charger into an electrical outlet.
WARNING: Only use approved chargers with your device. Incompatible chargers or tampering with the
charging port could damage your device and void the warranty.
