030-300239 Rev. A
96
March 2008
Verizon FiOS Router (Model 9100VM)
User Guide
13.2.4.2
WAN PPPoE Properties—Settings
If you selected
Settings
in the left submenu, the following screen will appear. This screen allows you to select the
Router’s WAN Ethernet port on the rear of the Router for connection to another VDSL2 device, through which you
will connect to the Internet. Click the link labeled
Underlying Connection.
If you clicked
Underlying Connections
, the following screen will appear. Select
Ethernet
from the
WAN Interface
drop-down list.
IMPORTANT:
When Ethernet is selected as the WAN interface port, the VDSL2 port on the rear of the Router
will not be used. (By factory default, the VDSL2 is the active WAN interface port.)
