030-300505 Rev. A
105
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
To configure DMZ Host, in the
DMZ Host
screen, select a device from the drop-down menu. The selected device
will share your WAN IP address. Next, click
Enable
to allow the setting to take effect.
NOTE:
The actual device name may differ from the name displayed in this screen.
If you clicked
Enable
in the preceding screen, the following pop-up screen will appear. The Router must be reset to
allow the new configuration to take effect. Click
OK
to continue.
If you clicked
OK
, the following screen will appear. After a brief delay, the home page will be displayed. Confirm
that you have a DSL link and that your PPP Status displays
UP.
(If necessary, click the
Connect
button to establish
a PPP session).
