030-300505 Rev. A
125
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
Remote Administration
User Name
Default = admin
The name used for the Remote Administration session. The only valid characters are (a-
z, A-Z, 0-9). The user name must be at least 6 characters and must not exceed 12
characters long.
Password
The password used for the remote administration session. Do not use spaces or double-
quotes in the password field. The user name must be at least 6 characters and must not
exceed 12 characters long.
Timeout
Default = 20 minutes
The interval (in minutes) after which the remote access will disconnect, if it is idle.
Disable Timeout
Default = deactivated
To activate the Disable Timeout feature, click this box (a check mark will appear).
Clear the box to deactivate this feature.
Enable Remote Access Default = deactivated
Click this box (a check mark will appear) to activate Enable Remote Access.
Clear the box to deactivate this feature.
Remote URL
Displays the URL for the remote access session.
15.7
ATM Loopback
In the
Advanced
screen, click
ATM Loopback
. If you change the setting in this screen, you must click
Save
to
allow the settings to take effect.
NOTE:
When the
Enable ATM 0/21
box is checked, this feature enables Alcatel 0/21 loopback. If the box does not
display a check mark, this feature is disabled.
It is recommended that you do not change this setting.
Enable ATM 0/21 Loopback
Factory Default = Enabled
This option enables the 0/21 loopback, which is used by Verizon.
Note: It is recommended that you do not that you change this setting.
