030-300505 Rev. A
136
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
15.12
Universal Plug and Play
In the
Advanced
screen, click
Universal Plug and Play.
This feature advertises the presence of your Router on the
LAN.
To enable UPnP in your Router, do the following:
1.
Click the
UPnP Enable
box (a check mark will appear in the box).
2.
Click
Apply
to allow the change to take effect.
3.
Click
OK
in the pop-up screen to reset the Router.
NOTE:
By factory default UPnP is disabled. If you have previously enabled UPnP and now want to disable it, click
the
UPnP Enable
box to remove the check mark, and then click
Apply
.
