030-300505 Rev. A
143
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
Public LAN
Public LAN DHCP Server Enable
Default = Disabled (deselected)
If this box contains a check mark, this enables DHCP addresses to be
served from the Public LAN pool.
Public LAN Enable
Default = Disabled (deselected)
If this box contains a check mark, this enables the addresses from the
Public LAN to bypass the NAT interface.
Public LAN IP Address
Provides a Public IP Address if the service provider does not
automatically provide one.
Public LAN Subnet Mask
Provides a Public Subnet Mask if the service provider does not
automatically provide one.
If you clicked the
Public LAN DHCP Server Enable
box, the following screen will appear. Click the
Public LAN
Enable
box (a check mark will appear in the box).
NOTE:
By enabling the Public LAN DHCP Server, you automatically disable the Router’s Private LAN DHCP
Server. (
Private LAN DHCP
is the default setting for VersaLink.)
