030-300505 Rev. A
23
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
Next, select the connection type (Manual, On Demand, Always On) that you want to use for your default connection
profile.
•
Manual:
Select this option if you want to manually establish your PPP session.
•
On Demand:
Select this option if you want the Router to automatically reestablish your PPP session on
demand anytime your PC requests Internet activity (for example, browsing the Internet, email, etc.). Please note
that when you have Internet traffic, this setting may cause a delay.
•
Always On:
Select this option if you want the Router to automatically establish a PPP session when you log on
or if the PPP session goes down. The Router’s factory default setting is Always On.
If you enable the Router’s timeout feature, the Router will end the PPP session upon reaching the number of minutes
you specify for connection timeout. To configure connection timeout, do the following:
1.
In the
Connection Type
field, select either
Manual
or
On Demand
as the connection setting.
NOTE:
The
Time Out Enable
feature does not apply to
Always On,
only to
On Demand
and
Manual,
and the
timeout option will be dimmed if you select
Always On
. The Router’s default connection type is
Always On.
2.
Next, click the
Time Out Enable
check box (a check mark will appear in the box).
3.
Type the number of minutes in the
Minutes for Connection Time Out
box.
