030-300505 Rev. A
66
April 2007
User Guide
VersaLink Wireless Gateway (Model 327W)
13.2.2.3.1
Bridge Protocol— Bridge Mode
For example, if you select
Bridge
as the Protocol, and then select
Bridge
from the
Bridge Mode
drop-down menu,
the following screen will appear.
IMPORTANT:
If you configure the Router to use Bridge protocol and Bridge Mode, you must disable the Router’s
DHCP server. By disabling the DHCP server and using Bridge protocol (Bridge mode), you will allow the computer
to receive its IP address directly from the ISP’s DHCP server, not from the Router’s DHCP server. For instructions
on disabling the Router’s DHCP server, see section 15.14, “IP Address Distribution.”
After you have disabled the
Router’s DHCP server, you must reboot the computer to allow the change to take effect.
The following screen shows that
Bridge
has been selected in the
Bridge Mode
drop-down menu. Click
Apply.
