EUROBLOC
SERVICE MANUAL FOR HOIST
104/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Disassembly
1
2
Remove the limit switch (6) which is assembled to end plate
with screw and washer.
Remove the bolt (8) to remove the follower wheel (5) with the
axle.
3
4
Remove fixing plate and the spring (4) by removing the
fastenings holding them.
Remove cam ring halves (2) from the brake rims (1) with the
bolts (9) and washer and the bushings (10) between the cam
ring (2) and brake rim (1).
5
6
Remove the bolts (11) and disc springs (12) holding the brake
rim halves (1) together.
Remove the locking screw (13) holding the axle (14) to
remove the axle. Remove the detent arm (3) and the sleeve
bearings (15) inside it.