EUROBLOC
SERVICE MANUAL FOR HOIST
135/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Adjustment
1
2
Adjust the hook height so that it is at a distance of C below the
girder. The value of C varies for every hoist and can be found
in the topic “Hoisting limit switch”.
Loosen the screw of the mounting plate (9) and adjust its
height so that there is H = 5 mm gap between the trigger and
the hook.
H = 5 mm
