EUROBLOC
SERVICE MANUAL FOR HOIST
148/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Left hand lay of strands in the rope
Right hand lay of strands in the rope
7.2.6.1 Replacing the wire rope
Disassembly
1
2
Adjust (or by-pass) the lower limit switch (1) so that the rope
can be fully unwound from the drum
Lower the hook onto a stable working-platform. Pull, with a
gloved hand, the rope down from the drum, until the last turn.
Remove the rope guide, see section “Rope guide, Assembly”
for details.
3
4
Switch OFF the power supply to the crane.
Extract the rope anchorage (2) from the overload device, see
section “Rope anchorage, Assembly” for details and remove
the rope from the anchorage.
5
