EUROBLOC
SERVICE MANUAL FOR HOIST
17/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
21
M
(HS03)
Overload
device
M
C
Mechanical limit switch
Strain gauge
HS03 value
MEC
SG
P
0
Hoist power measurement
Without overload device
HS03 value
POW
NO
22,23
20
Trolley high
speed
20
30
< 25 m/min
≥
25 m/min
BV 2 speeds motor
24
E
(TR05)
Travelling
control mode
M
E
MS2
EP2
TR05 value
MS2
EP
C
Contactor
(2 speeds motor)
TR05 value
25
N
Special
properties
S
O
Standard
Standard pre-designed features
M
E
D
Special
Meca
Elec
M+E
4.5
Motor Identification Data
Motor serial number and other motor information such as motor type are stated on the motor rating plate which is
located on the motor.
Hoisting motor
Note: Hoisting motor data plate may also be located on the side plate of the hoist/trolley.
A
Motor rating plate
Product identification data
B
Bar code sticker
Product order references
1
Motor type code
Exact model of the product
2
Motor serial number
Unique number which identifies the unit
3
Input
Acceptable main voltage range and frequency that the product can be connected to
4
Output
Voltage range the product is able to provide at a specified output capacity
5
Phases
Phase quantity of the motor
6
Approvals and standards
Directives and approvals which the product complies to. Refer to the chapter “Standards and directives”.
7
Factory work number
Motor factory work number
8
Motor type code
Exact model of the product
9
Reference numbers
Order related numbers
10
Identification number
Identification number of the motor, this number used when ordering spare parts
11
Bar Code
Bar code which includes, for example, the product’s serial number and ID in an optically readable form
