EUROBLOC
SERVICE MANUAL FOR HOIST
170/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
2d
If the screw is too short and is only barely held by self-
clinching nut of the latch, switch to a longer adjustment
screw.
3
Once you have chosen the correct screw and adjusted the
play (movement), assemble the latch along with its spring,
bolt, and nut to the hook forging.
4
Test the operation of the latch trigger by
• attaching a load to the hook
• detaching a load from the hook.
When the trigger is moved in the up or down direction, the
magnetic hold is released and the latch closes onto the hook
tip due to the spring force.
Disassembly
Disassemble the whole hook latch from the hook forging:
