EUROBLOC
SERVICE MANUAL FOR HOIST
171/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
7.2.7.7 Maintenance of magnet operated hook latch trigger
1
2
Check the operation of a hook latch trigger on a regular
basis.
If the trigger play is too loose or too tight, adjust the
movement with the adjustment screw in the middle of the
magnet. By turning the screw towards the latch (clockwise),
the play decreases, and by turning the screw towards the
forging (counter-clockwise), the play increases.
Adjust the screw with a hex key.
3
Clean the magnet when necessary to ensure its proper
function.
7.2.7.8 Hook opening
The following table lists the allowed variation in the hook opening. If the opening is bigger than stated in the table,
the hook is no longer acceptable, and it must be replaced.
