EUROBLOC
SERVICE MANUAL FOR HOIST
191/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Reassembly
1
2
Install the motor to the gearbox and ensure that the splines on
the shaft engage correctly. Secure the motor into place with
the fixing screws (3).
Install the power plug (8) to the motor.
3
Install the machinery covers and switch ON the power supply
to the hoist.
7.3.5 Traveling brake
7.3.5.1 Construction of Compact brake for traveling motor MF06
Disassembly
1
2
Switch OFF the power supply to the hoist. Ensure there is no
danger of live voltage.
Remove the power supply plug (8) for the traveling machinery.
3
4