EUROBLOC
SERVICE MANUAL FOR HOIST
58/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
7.1.4 Rope guide
The rope guide ensures that the wire rope winds on the drum correctly and prevents the wire rope from jumping
into the wrong groove.
CAUTION
Check the correct installation.
When installing a rope, install a left-hand lay on the right-hand groove and a
right-hand lay on the left-hand groove.
When installing a rope guide, install always a right-hand guide on the right-
hand groove and a left-hand guide on the left-hand groove.
7.1.4.1 Construction of rope guide for hoist frame size: VTs
1. Fixing screws
2. Bearing housing
3. Intermediate shaft
4. Sleeve half
5. Rope guide
6. Rope
Disassembly
1
2
Switch OFF the power supply to the hoist. Remove the
machinery cover.
Loosen fixing screws (1) to remove bearing housing (2) and
second half of sleeve (4) on both ends of rope guide (5).
Remove the rope guide (5) from the intermediate shaft (3) and
remove first halves of sleeves (4).
