EUROBLOC
SERVICE MANUAL FOR HOIST
82/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
1.Gearbox cover
2.Breather plug
3.Gear housing
4.Shaft assemblies
5.Paper sealing
6.Lip sealings
1
2
Replace the breather plug (2) with a blind plug
before disassembling the gearbox from the hoist
and the motor.
Set the gearbox on a working surface carefully
with the cover (1) on top. Unscrew the four
screws that keep the two gearbox halves
together, but do not detach the halves from each
other at this phase.