STAGEMAKER®
-
29
VERLINDE reserves the right to alter or amend the above information without notice.
11/2008
8.2 Lifting
assembly
,
Only a genuine, manufacturer's chain may be used.
,
Never use the lifting chain as a sling.
,
Never twist the lifting chain.
,
Do not bundle the chain into the chain bucket.
,
Always keep the chain clean and oiled and check that it is in good condition every day.
8.2.1 Slack fall stop (in the chain bucket)
,
The slack fall stop is a safety component, not a functional one.
,
A correct length of chain is required to avoid using it.
REMOVAL:
•
Remove the nut.(3)
•
Remove the screw.(2)
•
Remove the two halves of the stop.(1)
REPLACEMENT:
•
Check that there is at least 150 mm of chain under the slack fall stop.
•
Position the two halves of the stop around the chain.(1)
•
Insert the screw and put the nut.(3)(2)
,
Make sure that the stop is correctly fitted. The locking tube should be turned towards the
hoist.
