Instruction manual Carpo 3 / Carpo 4
Last updated: 2017-02
4
Seat height adjustment (Fig. D)
The seat can be adjusted in 4 different seat heights (increments: 25 mm).
Remove the seat.
Remove the plastic rear cover.
Loosen the screw for the seat height adjustment
a little bit.
Remove the safety pin
.
Move the adjustment bar for height adjustment
upwards/downwards in the receiver, and place
these in a comfortable seat height.
Replace the safety pin
.
Fasten the screw
and check that the play of the seat is reduced.
Replace the plastic rear cover.
Replace the seat.
Check the seat is locked securely.
D
1
2
4
3
1 = Seat
guide
2 = Adjustment
bar
3 = Fixing screw of seat height
4 = Safety
pin
1 = Seat
lever
2 = Seat
3 = Seat depth adjustment lever
4 = Seat depth rails
5 = Adjustment bar
Fig. C