Eclips XXL
2013-04
Page 8
To apply the brakes:
1.
Push the brake handles forward till you feel a
distinctive click.
L
L
L
L
CAUTION:
Risk of unintended movement –
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
To release the brakes:
1.
Release one brake by pulling the handle
backwards.
2.
Hold the hand-rim of the released wheel with
your hand.
3.
Release the second brake by pulling the handle
backwards.
2.5 Mounting or removing of arm supports
L
L
L
L
CAUTION:
Risk of clamping – Keep fingers, buckles and clothes away from the
bottom side of the arm support.
L
L
L
L
CAUTION:
Risk of injury – Check that the arm supports are firmly mounted
before using your wheelchair.
The arm supports of the wheelchair can be mounted by following instructions.
1.
Mount the rear tube of the arm supports in tube hood
.
(Fig A)
2.
Make sure the arm support is mounted very well.
3.
Fold the arm support forward.
4.
Pull the lever
on tube hood
upwards.
(Fig B)
5.
Click the front tube of the arm support in tube hood
.
(Fig B)
A
B
Summary of Contents for Eclips XXL
Page 115: ......
