Forest, Forest Narrow
2012-12
Page 10
L
Before getting on or off, taking apart or transporting your electric wheelchair, put your
wheelchair off with the "ON/OFF" button.
L
Check that the profile depth of the tyres is adequate.
L
If your electric wheelchair has pneumatic tyres, be careful to inflate them to the correct
pressure (see pressure indication on the tyres).
L
If devices and furnishings like ramps or lifts are available, use them.
L
Risk of injury in case of a sudden stop - Always use the safety belt.
L
Risk of burns – Be careful when driving in hot or cold environments (sunshine, extreme
cold, etc.) for a sufficient amount of time and when touching - Surfaces can assume the
environment temperatures.
L
Changing the software is only allowed by Vermeiren. For changes in the software
contact Vermeiren.
2
Use
This chapter describes the everyday use. These instructions are for the user and the
specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility. A
list of Vermeiren facilities can be found on the last page.
The electric wheelchair is delivered fully assembled by your specialist dealer. The
instructions intended for the specialist dealer on how to set up the electric wheelchair are
given in § 3.
2.1 Remarks on electromagnetic compatibility (EMC)
Your electric wheelchair has been tested according ISO 7176-21 for EMC-compliance.
We wish to point out that sources of electromagnetic waves are liable to create interferences.
The electronics of the wheelchair itself could affect other electric appliances too.
To reduce the effect of electromagnetic sources of interference, please read the following
warnings:
L
WARNING:
The wheelchair might disturb the operation of devices in its
environment that emit electromagnetic field.
L
WARNING:
The driving performance of the wheelchair can be influenced by
electromagnetic fields (e.g. electricity generators or high power sources).
L
WARNING:
Avoid using any portable TV or radio in the immediate environment of
your wheelchair for as long as it is turned on.
L
WARNING:
Avoid using any transmitter-receiver in the immediate environment of
your wheelchair for as long as it is turned on.
L
WARNING:
Check the area for transmitter masts and avoid using the wheelchair
close to them.
L
WARNING:
If involuntary movements or braking occur, turn off the wheelchair as
soon as it is safe to do so.
Interfering electromagnetic fields may have a negative effect on the wheelchair’s electronic
systems. These can include:
•
Disengagement of the engine brake
•
Uncontrollable behavior by the wheelchair
•
Unintentional steering movements
In the presence of very strong or enduring interfering fields, the electronic systems could
even break down entirely or suffer permanent damage.
