Gemini
2011-11
Page 16
3.5 Backrest
L
L
L
L
WARNING:
Risk of injury – Check the backrest is well fixated.
The Gemini has been equipped with a back with adjustable inclination and adjustable height.
In combination with the adjustable seat and footrest will the Gemini provide optimal settings
for your child.
Depending on individual needs, two types of side supports (L03) can be mounted and will
increase the comfort and safety of its users.
3.5.1 Adjusting the inclination of the back
Gemini:
In the back part of the metal frame is a slider located that can be locked with the adjustment
handle M6. The release of this handle will ensure a seaming less transition from folded-
position (easy for transport) to a laying-position. The laying-position has been secured with
limiters.
The frame needs to be locked again, by means of adjusting handle M6, after adjusting the
position of the back.
Gemini 40 and 45:
On the rear of the backrest frame is a rod and blocked fixing pin .
1. Pull the pin to change the angle of the backrest.
2. Pull or push on the backrest until the desired angle (6 different positions in steps of
8,5 mm). The maximum angle is when the rod hits the blocking pin .
There is an extra hole (hole 7), that prevents that the backrest will be lift back in
the vertical position when the backrest is folded to the seat.
3. Release the pin .
4. Check that the backrest is well fixated.
