Inovys II-E
2019-02
Before use
12
EN
NL
2.4.6
(Dis)Assembling rear wheels (only for 22”/24”):
For transport purposes, it might be necessary to (dis)assemble the rear wheels.
Removing the rear wheels:
1.
Press and hold the button (43) while sliding the wheel
axle out of the axle bushy.
2.
Repeat this for the other wheel and place the
wheelchair gently on the tipping caps.
Installing the rear wheels:
1.
Take one of the rear wheels and lift the wheelchair on
one side.
2.
Press and hold the button (43) while sliding the wheel axle in the axle bushy.
3.
Release the button to lock the wheel.
4.
Repeat this for the other wheel. Make sure that both wheels are firmly secured.
2.5
First use and storage
Risk of battery damage
•
Never completely discharge the battery.
•
Do not interrupt the charging cycle; only disconnect the battery charger when the
battery is fully charged.
•
Make sure that your wheelchair is stored dry to prevent mould to grow and damage
the upholstery.
•
Check the technical details for storage, see chapter 5.
Ensure that the battery has been fully charged before using your wheelchair, ask your
dealer if this has already been done or not. To charge, follow the charging instructions in
§3.7.
CAUTION
43
