Inovys II-E
2017-02
Page 12
2.9 Pushing
handgrips
L
CAUTION:
Risk of injury - Make sure that the star knobs
are properly
tightened.
L
CAUTION:
Risk of tipping over - Use only the last indentation of the pushing
handgrip tube for the maximum height adjustment.
The pushing handgrips can be adjusted in height
depending on the size of the attendant.
1. Loosen the star knob
located on the
back of the handgrip tubes.
2. Pull the pushing handgrips into the desired
position (7 positions). Indentions
(steps
30 mm) have been placed into the tubing of
the
pushing
handgrips.
3. Retighten the star knob
firmly by hand.
2.10 Mounting or removing backrest
L
WARNING:
Risk of injury – Check that the backrest is firmly mounted into the
four brackets before using your wheelchair.
L
WARNING:
Risk of injury – Avoid getting your fingers, clothes caught during the
assembly
process.
The backrest of the wheelchair can be mounted
by following instructions.
1. Mount the backrest into the four brackets
+
.
2. Turn on the upper star buttons
to lock the
star buttons by hand.
3. Check that the backrest is firmly fixated.
To remove the backrest of the wheelchair:
1. Loosen the upper star buttons
.
2. Pull the backrest upwards out the four
brackets
+
.
Summary of Contents for Inovys II-E
Page 1: ...VERMEIREN Inovys II E I N S T R U C T I O N M A N U A L...
Page 31: ......
