Inovys wheelchairs
2019-02
Adjustments
Installation manual
- 4 -
EN
NL
PL
CS
3
Adjustments
Risk of tipping over
Be aware that by changing the position of the rear wheels, the stability of the wheelchair
is influenced. By adjusting the rear wheels
in rear adjustment position, the wheelchair becomes more stable, but less
manoeuvrable;
in front adjustment position, it becomes less stable but more manoeuvrable.
Important remarks
For more information, contact Vermeiren.
To increase stability and manoeuvrability, the following adjustments can be made:
rear-wheel position, see §3.1.
seat height and angle, see §3.2.
CAUTION
Risk of injuries or damage
Read the user manual of the specific wheelchair.
Be aware of the technical details and limits of intended use; see the user manual.
The wheelchair needs to be adjusted by a specialist dealer according to the
instructions in this chapter.
Only use parts and tools described in this manual.
Prevent bystanders from accessing the working area.
Collect all small parts in a box or bag.
While adjusting and operating the wheelchair, make sure no objects or body parts get
caught between moving parts. In particular, pay attention to the position of the
cables.
If a battery is applied, unplug the battery charger and switch the operating console off
before you perform any mechanical adjustments.
Any modification to the product will lapse the warranty and will cease the
responsibility of Vermeiren.
Make sure all screws are firmly secured before riding your wheelchair.
Adhere to the
tightening torques for screws according to the Torque table on our website.
CAUTION
