E
TRACER
01/2010
8
To switch back to the driving program, select the
drive profile button (8) in drive mode.
Adjust function
In
Display
Display
Menu
Seat inclination
Angle of backrest
Leg support
left
Leg support
right
Leg supports
simultaneous
The only functions displayed in the menu selection and
the centre of the display are those which exist on your
wheelchair and have been enabled.
L
Make sure that no objects and/or persons are
inside the swinging range of the adjust functions,
since this could cause damage and/or injury.
L
For your safety the adjust functions can only be
activated when all four wheels of the wheelchair
are standing still. The driver programs are
disabled while the adjust functions are active.
Set time
Select the program function using the field
selection button (9) and the display will show the
menu for the special functions.
Select
left/right
with the joystick or the menu
selection button (10) until the time function you
want appears in the centre of the display.
If you want to set the time, confirm by moving the
joystick
upwards
.
The time digit waiting to be set flashes. To change
other digits, you can select
left/right
with the
joystick or use the menu selection button (10).
To adjust the digits, select
upwards
with the
joystick.
To save the new time, confirm by moving the
joystick
downwards
.
To switch back to the driving program, select the
drive profile button (8) in drive mode.
By default, the factory sets the time to be visible in the status display. To change this option, proceed
as follows:
Select the program function using the field
selection button (9) and the display will show the
menu for the special functions.
