V-drive
2020-05
Using V-Drive
9
EN
NL
3.6 Adjusting the V-Drive module height
The height of the V-Drive module can be adjusted
over a range of 8 cm (5 steps):
1. Remove the V-Drive module from the
wheelchair as described in §3.2 .
2. Remove the bolt-nut connection (15).
3. Slide the telescopic tube support (16)
up/down over the attachment block to the
desired height.
4. Replace and firmly tighten the bolt-nut
connection (15).
5. Reattach the V-Drive module to the
wheelchair according to §3.1.3 .
15
16
